Epoxy without solvents
EP w/o solvents

EXTERNAL COATING AND INTERNAL LINING

Epoxy without solvents EP w/o solvents

Epoxy without solvents offered by V.I.P. Pesaro is a solvent less coating with a high content of solids, applicable without primers. Recommended in industrial sectors, where coating is required in accordance with the requirements foreseen by standards EN 10289 e DIN 30671, guarantees also high chemical, physical resistance and duration over time.

Long-term anti-corrosive protection

  • Excellent resistance to corrosion in marine and chemically severe environments.
  • Excellent resistance to corrosion under immersion both in freshwater and saltwater.
  • Excellent anti-corrosive protection of structures and underground piping.
  • Excellent resistance to cathode detachment.
  • Excellent resistance to electric insulation (12,000 volts/mm)

Very good mechanical protection

  • Excellent resistance to blows and abrasions.
  • Guarantees very good mechanic resistance to abrasion and blows during installation, thanks to its characteristic flexibility.

Other advantages of EP coating
Epoxy without solvents coating can be applied with a brush using a special version of the product, it is possible to guarantee coating continuity even for very complex items. There are no limits in the quantity of pieces which may be coated, even individual pieces may be treated. Differentiated thicknesses can be applied in accordance with design specifications.

EPOXY WITHOUT SOLVENTS PROCESS

EXTERNAL COATING

INTERNAL LINING

Epoxy without solvents – EP w/o solvents - SCHEME PROCESS

INSPECTION AND TESTING

These are merely approximate values adjustable according to clients’ requirements.

Property Test Description Typical Values
Specific electrical insulation EN 10289 100dy at 23±2°C – 0,8028MΩm^2
30dy at 80±2°C – 1,138KΩm^2
Impact EN 10289 5J•K•mm +23±2°C (K=0,85); 3J•K•mm (K=0,85) at -5±2°C
Cathodic Disbonment EN 10289 28dy at +23±2°C average radius 1,5mm, max radius 4,24mm
2dy at +60±2°C average radius 2,91mm, max radius 4,85mm
Pull-off EN 10289 23°C average value 9,75MPa; 80°C average value 3,60MPa
Continuity (Holiday detection) EN 10289 25KV passed; 8V•μm thickness-max 20KV

COATING CAPACITY

Pipes:
Diameter from 1/2” to 120”
Maximum unit length 13.5 meters
Maximum unit weight 15,000 kg.
Joints and/or custom pieces: (bends, tees, reducers, flanges, etc.)
Maximum size 3.0 x 3.0 x 13.5 meters
Maximum unit weight 15,000 kg
Maximum thickness of the coating 3,5 mm

DOCUMENTATION

PROCESS - EP EPOXY

CERTIFICATIONS

VIP certificates

Get A Quote Today