CML – Cement Mortar Lining

INTERNAL LINING

CML – Cement Mortar Lining

V.I.P. Verniciatura Industriale Pesarese srl is one of the few companies able to offer the CML – Cement Mortar Lining.
Cement–mortar-lined and cement–mortar-coated steel pipe combines the physical strength of steel with the protective qualities of cement mortar. The lining, applied centrifugally, creates a smooth, dense finish that protects the pipe from tuberculation and provides a measure of corrosion protection. There are several fields of application: waterproofing of drinking water’s tanks and cisterns, irrigation canals, foundation walls, elevator shafts, or even for decorative purposes.

Long-lasting corrosion protection
The smooth interior surface will provide a high flow coefficient for an higher lifespan of the pipeline under normal operating conditions. In addition, the cement–mortar coating results in a tough, durable, and rugged coating that forms an alkaline environment where oxidation or corrosion of the steel is inhibited.

Water transport
Cement Mortar Lining (CML) is specifically conceived for rehabilitating steel and cast iron pipes designed for the transportation of water, whether drinkable, industrial or marine.The purpose of installing a cement/mortar lining to the interior wall of the pipe is to reduce the process of tuberculation inside the pipe network. CML provides an area of high pH near the pipe wall and a barrier between the water and the pipe, reducing its susceptibility to corrosion.

Other advantages CML
This technique can be used also to rehabilitate pipelines for the transportation of crude oil and fuel. CML layer, besides protecting the internal surface of the pipe from corrosion, occludes the holes that can be present in the pipe, restoring its waterproofing. It is in fact mainly used in rehabilitating aqueducts suffering from widespread leaks.
The thickness of the layer of the mortar can vary according to need.

CML - Cement Mortar Lining3LPE - Three Layer Polyethylene

CML – CEMENT MORTAR LINING PROCESS

INTERNAL LINING

CML – Cement Mortar Lining - SCHEME PROCESS

INSPECTION AND TESTING

Property Test Description Typical Values
Compression resistance EN 12190 24h ≥ 8 N/mm2; 7d ≥ 20 N/mm2; 28d ≥ 30 N/mm2
Bending strength EN 12190 24h ≥ 2 N/mm2; 7d ≥ 5 N/mm2; 28d ≥ 7 N/mm2
Permeability coefficient EN 1062-3 W < 0,1 ( III Class: low permeability )
Water vapor transmission EN ISO 7783 Sd < 1,5 m ( I Class: water vapor permeable )
Buoyancy resistance EN 14891 method A7, positive and negative buoyancy 2,5 atm

COATING CAPACITY

Pipes:
Diameter from 1/2” to 120”
Maximum unit length 13.5 meters
Maximum unit weight 15,000 kg.
Joints and/or custom pieces: (bends, tees, reducers, flanges, etc.)
Maximum size 3.0 x 3.0 x 13.5 meters
Maximum unit weight 15,000 kg

DOCUMENTATION

PROCESS - CML CEMENT - MORTAR LINING

CERTIFICATIONS

VIP certificates

Get A Quote Today