FBE – Fusion Bonded Epoxy

EXTERNAL COATING AND INTERNAL LINING

fbe - FBE – Fusion Bonded Epoxy

V.I.P. Verniciatura Industriale Pesarese srl is one of the few companies able to offer Fusion Bonded Epoxy (FBE) coating on special pieces as well as on pipes.
The best epoxy resin powder applied on pre‐heated surfaces.
Thermosetting coating designed for the anticorrosive protection of articles destined to immersion or buried services in oil and gas sector and in the protection of the water pipeline.
The coating can be applied in a single double or triple layer and the method used guarantees that the coating can be applied with differentiated thickness as required by the specification.

  • Approved by Saudi Aramco

  • Approved for Drinking Water

Single and double layer coating

The single and double layer include a range of applicable products for meeting the most varied requirements in relation to pipeline protection.
It is one of the most economic coatings for pipelines.

Main advantages:
– Excellent adhesion to the metal substrate.
– High resistance to cathode detachment.
– Excellent resistance to corrosion and mechanical properties.
– Resistant to bending even when the film is very thick.

Long-lasting corrosion protection

The FBE primer offers an excellent adhesion to the substrate and provides a long-term corrosion protection for pipelines operating at moderate temperatures.
It also ensures the resistance to the cathodic disbondment so the total cost of cathodic protection of the pipeline decreases.

FBE Lining of valves is suitable for drinking water

FBE_Fusion_Bonded_Epoxy_Lining_facebook_image

FBE PROCESS

EXTERNAL COATING

INTERNAL LINING

FBE - FUSION BONDED EPOXY - SCHEME PROCESS

INSPECTION AND TESTING

High resistance to impact Adhesion in hot water
Low porosity Dielectric strength
Applicable at various thickness Elevate value of cathodic resistance
Various grades of bendability Low value of water absorption
Variable hardness High heat distortion resistance

COATING CAPACITY

Pipes:
Diameter from 1/2” to 120”
Maximum unit length 13.5 meters
Maximum unit weight 15,000 kg.
Joints and/or custom pieces: (bends, tees, reducers, flanges, etc.)
Maximum size 3.0 x 3.0 x 13.5 meters
Maximum unit weight 15,000 kg
Maximum thickness of the coating 3,5 mm

DOCUMENTATION

FBE – Samples

PROCESS - FBE - Fusion Bonded Epoxy

FBE Coating – More application

V.I.P. Pesaro takes care of customers needs designing custom coatings for special pieces in order to always satisfy clients expectations. Since more than ten years we are providing our protective solutions worldwide.
We offer specific consultancy since the analyses of project requirements. We design the best solution selecting with the client the most suitable coating and the best applicable technique. After realization, we carry out laboratory tests to truly guarantee a perfect results.

Double Layer FBE + Rough coating

Double Layer FBE

Double Layer FBE + Rough coating

2 Layer FBE + Rough Coating

FBE special pieces

FBE Special Pieces

FBE LINING

YOU MIGHT BE INTERESTED IN…

Get A Quote Today